To watch a video version of this podcast, click here: https://youtu.be/0US0bHGynQo

In this episode, Reuben Saltzman and Tessa Murry once again welcome Structure Tech’s Service Manager, Eric Houseman, for a deep dive into one of the most debated topics in home inspections: flashing and exterior water management.

Prompted by an email from fellow home inspector Chris, the discussion explores real-world challenges with flashing details, siding clearances, and the gap between best practices and industry standards. The episode highlights why these details are often overlooked, how that impacts homes, and what inspectors and homeowners should know to avoid costly hidden damage.

Here's the link to Inspector Empire Builder: https://www.iebcoaching.com/events

Takeaways

“No damage yet” is not a valid reason to ignore improper flashing—problems can take years to surface.
You often cannot confirm the absence of damage without intrusive inspection, so assumptions are risky.
Even small, undersized, or poorly angled kick‑out flashings can increase water intrusion potential.
Head flashing/drip caps above windows and doors are universally required by manufacturers—even if local builders claim otherwise.
Context matters: overhangs, siding type, wall assembly, and home age affect how serious missing flashing is.
Water‑resistant barriers and tape alone cannot replace properly installed rigid flashing.
When in doubt, report the defect clearly and let the builder or homeowner decide the next steps.
Home inspectors must balance clarity, liability, and real‑world practicality when writing reports.
Builder and agent pushback is common—but manufacturer instructions are the ultimate authority.
Good bedside manner and client communication can prevent inspectors from being labeled “deal killers.”

Chapters

00:00 Intro and episode setup
00:27 Welcoming back Eric Houseman
00:56 Show sponsor: IEB
01:40 Listener Chris’s email and the topic of exterior water‑management defects
02:47 Question 1: Kick‑out flashing
05:23 Undersized or improperly angled kick‑outs
06:15 “There’s no damage—why mention it?”
08:06 When and why Structure Tech calls out inadequate kick‑outs
09:43 Real‑world builder behavior and simple fixes
11:11 How wording in reports focuses on increased potential for problems
12:10 Balancing best practice and liability
13:53 Question 2: Drip caps and head flashing
17:12 Why windows and openings universally require rigid flashing
18:37 Builder pushback: “It’s not required.”
21:07 What siding manufacturers expect (and why it matters)
24:03 Considering home age, siding type, and overhangs
25:46 A continuum of concern: stucco vs. vinyl
28:08 How Structure Tech phrases drip‑cap comments
29:12 Question 3: Z‑flashing, drainage gaps, and siding clearance
31:57 Manufacturer requirements vs. real‑world installations
32:46 Structure Tech’s canned report language
36:57 Should you mention missing kick‑outs on older homes? (Yes.)
38:48 Reuben’s personal stucco repair story
41:25 Why missing flashing matters even on pre‑1990s homes
41:43 How to respond when builders say “No other inspector reports this”
45:13 Handling pushback and the “deal killer” label
47:26 How agents affect deal perception
51:11 Improving client experience and reducing anxiety
52:59 Understanding client “pain tolerance.”
54:24 Closing thoughts and invitation for listener feedback

To watch a video version of this podcast, click here: https://youtu.be/c9hch5yyc-U

In this episode, Reuben Saltzman and Tessa Murry are joined by Structure Tech’s Services Manager, Eric Houseman, for a wild home‑inspection story that starts with a simple missing bath‑fan termination and snowballs into a major discovery. What begins as routine training turns into a dramatic game of telephone between inspectors, agents, sellers, and contractors—and ends with one of the most shocking ventilation mistakes the team has ever seen: a bathroom exhaust fan tied directly into a power‑vent water heater exhaust.

Along the way, the trio talked about communication pitfalls, the importance of clear reporting, the routine inspection steps that prevent safety issues, and the unexpected discoveries that even seasoned inspectors don’t see coming. It's an episode filled with lessons, surprises, and plenty of inspector banter.

Here's the link to Inspector Empire Builder: https://www.iebcoaching.com/events
Check out this link to our new favorite Combustible Gas Detector, the TPI 720b:
https://amzn.to/3NgZtv7

Takeaways

Clear communication during inspections is essential—verbal explanations can easily be distorted.
Always wait for the published report, which is the most accurate representation of the findings.
Words matter: “exhaust gas leak” is not the same as “gas leak.”
Inspectors should avoid paraphrasing defects; copy the exact language from the report when relaying information.
Even “routine” findings require careful verification—small details prevent major hazards.
A bath fan must exhaust to the exterior, and improper venting can create serious safety risks.
Creativity in home projects isn't always a good thing—especially when it involves exhaust systems and combustion appliances.
When something seems off, dig deeper; sometimes the truth is hidden behind drywall.
A well‑written report, complete with photos and precise language, is a home inspector’s best protection.
Even experienced inspectors learn new things—sometimes in the most unexpected ways.

Chapters

00:00 Introduction and Minnesota’s heavy current events
01:07 Shifting to lighter topics and home‑inspection talk
02:35 Combustible gas detectors: retiring the TIFF 8900
05:00 The new winner: TPI 270B
07:21 Show sponsor shout‑out: IEB
08:35 Reuben’s reverse osmosis saga (and user error)
11:35 Tessa’s stinky well‑water updates
13:31 Introduction to Eric’s “thrown under the bus” story
14:25 The inspection setup and counting exhaust points
16:45 The missing basement bath‑fan termination
18:14 The telephone game between clients, agents, and sellers
19:37 HVAC contractor conflicts with the findings
20:55 Re‑inspection and detective work
22:17 The shocking discovery: bath fan tied into water‑heater exhaust
23:59 Why this is dangerous: carbon monoxide risk
25:11 No apology, but valuable lessons
27:33 How communication gaps amplify issues
28:44 Importance of clear reporting and avoiding paraphrasing
30:33 Wrapping the episode; preview of next topic
31:48 Closing remarks

To watch a video version of this podcast, click here: https://youtu.be/GcQUDCQAgsI

In this episode, Reuben Saltzman speaks with film producer George Siegal, known for his documentary Built to Last, Buyer Beware. They explore the hidden risks of home buying, with a focus on insurance coverage, building codes, and purchasing in high-risk areas. Drawing on his background in TV news, George emphasizes how often buyers overlook critical details such as insurance limitations and local hazards. The episode serves as a cautionary discussion, encouraging prospective homeowners to ask the right questions and make informed decisions to protect their investments and families.

Here's the link to Inspector Empire Builder: https://www.iebcoaching.com/events
Check out George Siegal’s LinkedIn profile here -
https://www.linkedin.com/in/george-siegal/
Complete this short form for access to the special offer mentioned on the show: https://pro.speakerhub.com/speaker-feedback/?qr=980babe6-74ff-48c0-b387-83ec6aa6fe38
For the long version of the film, Built to Last:
movetheworldfilms.gumroad.com/l/kaywco

Takeaways

You have to assess your overall situation.
Don't think that just because your house burned down, you don't have to still pay the mortgage.
You need to understand all this stuff, and it's not fun
You have to ask questions and find out as much information as you can.
If someone tells you you’re being a nuisance or refuses to answer your questions, don’t buy the house.
You should know what they are before you go and ask them the question.
You have to dig into that a little bit.
You have to become a detective when you're buying a house.
If a builder ever looks at you, puffs out his chest, and says, “This house is built to code,” I wouldn’t buy it.
You want an inspector who does more than just look at the plug rating and say, “Yeah, that plug’s not connected right.”

Chapters

00:00 Introduction and Guest Introduction
01:55 George Siegal's Background and Career Transition
03:08 Overview of the Documentary "Built to Last"
04:25 Understanding Home Buying Decisions
05:22 The Importance of Insurance Awareness
09:24 Assessing Risks in Home Locations
14:17 Building Codes and Their Implications
18:28 Navigating Insurance Challenges
22:38 The Role of Inspectors in Home Buying
30:23 Key Questions for Home Buyers

To watch a video version of this podcast, click here: https://youtu.be/eVsiOW_Ynig

In today’s episode, Reuben and Tessa reflect on their holiday experiences and catch up on recent home projects, sharing practical insights on everything from snowblowers to indoor air quality concerns. They dive deeper into the complexities of health issues tied to home environments and discuss water quality challenges in Tessa’s new Florida residence. Along the way, the conversation highlights the difficulties of identifying and resolving these issues while underscoring the importance of family, transitions, and new beginnings.

Check this link for my power shovel demo video:
https://youtube.com/shorts/FzCBk2Z1jpc?si=9iYfiCXwn88r8GD0

Takeaways

Time seems to speed up as we grow older.
Spending time with family is invaluable.
Snowblowers can be enjoyable to use.
Indoor air quality can significantly affect health.
Home diagnostics can be complex and frustrating.
Water quality issues can arise from various sources.
It's important to investigate health symptoms thoroughly.
New beginnings can bring both challenges and opportunities.
Collaboration in the industry can lead to better solutions.
Listening to others' experiences can provide valuable insights.

Chapters

00:00 New Year Reflections and Family Time
02:51 Home Projects and Snowblower Insights
05:59 HRV Troubles and Indoor Air Quality
12:01 Mystery Health Issues and Home Diagnostics
23:37 Water Quality Concerns and Solutions
30:02 New Beginnings in Florida

To watch a video version of this podcast, click here: https://youtu.be/btTlpjM1w2c

In this episode, Reuben and Tessa explore practical smart home upgrades and energy-saving tools. They share hands-on experiences with infrared cameras, energy monitoring devices, and water leak prevention systems. The discussion also touches on the challenges of managing multiple smart devices and finding the right balance between convenience and simplicity. If you’ve ever wondered which gadgets are worth the investment for safety and efficiency, this episode is for you.

Here's the link to Inspector Empire Builder: https://www.iebcoaching.com/events

Takeaways

Infrared cameras for mobile devices can be great backups but aren’t ideal for daily home inspections.
Smart plugs with built-in energy monitoring (like TP-Link TAPO) are affordable and effective.
Energy monitors help track electricity costs and optimize usage.
Automatic water leak detection systems can prevent costly damage and insurance claims.
Managing multiple smart devices can become overwhelming—simplicity matters.
Leak prevention systems like YoLink offer peace of mind for homeowners.
Investing in smart home tech should prioritize safety and efficiency over novelty.

Chapters

00:00 Introduction and Personal Updates
03:45 Infrared Camera Review: TopDon TC002C DUO
08:14 Affordable Alternatives for Android and Apple Users
09:37 Energy Monitoring Devices and Smart Plugs
14:30 Automating Energy Savings with TAPO Smart Plugs
18:00 The Reality of Managing Multiple Smart Devices
27:08 Leak Prevention Systems: Guardian vs. YoLink
32:12 Why Every Home Needs Automatic Leak Detection
35:45 Wrapping Up and Listener Invitation

To watch a video version of this podcast, click here: https://youtu.be/nu1GoDS3z-E

In this episode of the Structure Talk podcast, hosts Reuben Saltzman and Tessa Murry welcome Nate Mielke, a general contractor and remodeler. They discuss Nate's journey in the construction industry, the differences between design-build and general contracting, and the importance of building performance in remodeling projects. The conversation also touches on unique business practices that set Nate apart from other contractors, as well as valuable lessons learned from past experiences.

Here's the link to Inspector Empire Builder: https://www.iebcoaching.com/events
You can check Nate’s website here: www.skapar.net

Takeaways

Nate Mielke has been in the construction industry since 1997.
The design-build approach allows for better collaboration and project outcomes.
Pre-construction planning is crucial for successful remodeling projects.
Building performance considerations can impact client satisfaction and comfort.
Nate emphasizes the importance of understanding client budgets from the start.
Mistakes in contracts can lead to significant issues, including lawsuits.
Value engineering helps clients achieve their desired outcomes within budget.
Nate's company focuses on high-end remodeling projects, typically ranging from $200,000 to $600,000.
The use of technology and AI tools is becoming increasingly important in the construction industry.
Nate's experience highlights the need for good contracts and legal protections in contracting.

Chapters

00:00 Introduction and Personal Updates
07:17 Nate Mielke's Journey in Contracting
18:20 Understanding Design-Build vs. General Contracting
22:57 Project Scope and Examples
25:48 Cost Insights for Bathroom and Kitchen Remodels
26:48 Optimizing Space: Plumbing and Layout Considerations
27:49 Integrating Building Performance in Remodeling
30:16 Addressing Ventilation and Comfort in Remodels
32:41 Client Concerns: Health and Indoor Environment
34:16 Identifying Mold Issues in Older Homes
37:35 The Impact of Building Codes on Home Performance
38:21 Pre-Construction Planning: Setting Projects Up for Success
41:28 Leveraging Technology: AI in Construction Management
44:23 Learning from Mistakes: The Importance of Contracts

To watch a video version of this podcast, click here: https://youtu.be/MpJELehhLbc

In this episode of the Structure Talk podcast, hosts Reuben Saltzman and Tessa Murry sit down with Rob Howard, founder of Howard Building Science, to explore how he’s tackling one of the biggest challenges in housing today: building affordable, high-performance homes. Rob shares his journey from Habitat for Humanity to creating Duke Street Cottages, a pocket neighborhood in North Carolina designed for community, energy efficiency, and resilience.

Here's the link to Inspector Empire Builder: https://www.iebcoaching.com/events
You can check Rob’s website here: https://howardbuildingscience.com/

Takeaways

Building code is the baseline, not the finish line.
Pocket neighborhoods foster community and affordability.
SIP panels and modular construction reduce waste and speed up builds.
Zero-energy-ready homes require airtight envelopes and efficient systems.
Maintenance plans in HOA dues simplify homeowner responsibilities.
Financing options like on-bill programs can make upgrades attainable.
Skilled labor shortages are driving innovation in factory-built housing.
Monitoring humidity and ventilation is key to healthy homes.
Modular homes can achieve near-SIPs performance with customization.
Affordability starts with design choices and community planning.

Chapters

00:00 – Introduction and Sponsors
01:14 – Shoutout to IEB Coaching
02:07 – Meet Rob Howard: Builder & Innovator
04:43 – From Habitat for Humanity to Howard Building Science
07:34 – Why Energy Audits Are a Hard Sell
14:03 – Duke Street Cottages: Pocket Neighborhood Concept
18:35 – Affordability and Price Points
21:26 – Building Zero-Energy-Ready Homes
24:34 – SIP Panels vs. Modular Construction
31:00 – Ventilation, Humidity, and ERVs
36:56 – Tackling Skilled Labor Shortages
40:35 – Modular Factory Advantages
44:20 – Performance Trade-Offs in Modular Homes
47:22 – Lessons Learned and Developer Interest
49:14 – How to Connect with Rob Howard
50:38 – Wrap-Up and Listener Call-Out

To watch a video version of this podcast, click here: https://youtu.be/gcF3wVu0630

In this episode, Tessa Murry and Reuben Saltzman welcome Isaac Scott, a builder from Louisiana, to discuss his company, Clare Homes, and the innovative building practices they employ. Isaac shares his journey from working in the construction industry to starting his own business focused on energy-efficient and resilient homes. The conversation delves into the Fortified Home Program, which aims to enhance the resilience of homes against natural disasters, and the importance of building science in creating sustainable living environments. Isaac also discusses the challenges and learning curves faced in the construction industry, particularly in Louisiana, and how they are paving the way for better building standards.

Here's the link to Inspector Empire Builder: https://www.iebcoaching.com/events
You can check Clare Homes’ website here: https://www.clare-homes.com/

Takeaways

Isaac Scott is the co-founder of Clare Homes, focusing on energy-efficient homes.
Clare Homes builds to ENERGY STAR and Fortified Roof standards.
The Fortified Home Program enhances resilience against natural disasters.
Building science is crucial for creating sustainable homes.
Isaac emphasized the importance of community resilience in building practices.
The cost of building fortified homes is often outweighed by insurance savings.
Indoor air quality management is essential in high-performance homes.

Isaac's journey reflects the evolution of building practices in Louisiana.
The construction industry is seeing a shift towards better standards and practices.
Isaac encourages collaboration among builders for community improvement.

Chapters

00:00 Welcome and Introduction
02:52 Meet Isaac Scott: Builder and Innovator
03:55 The Journey of Clare Homes
08:49 Building Energy Efficient Homes
14:31 What Sets Clare Homes Apart?
17:26 Understanding Fortified Certification
25:05 Cost of Building Fortified Homes
25:38 Understanding Fortified Roofing Systems
28:39 The Importance of Continuous Load Paths
31:01 The Growing Interest in Fortified Homes
33:04 Insurance Incentives for Resilient Building
34:56 Cost Considerations for Fortified Homes
37:00 Building Techniques for High Performance Homes
39:28 Air Quality and Humidity Management
45:48 The Evolution of Building Standards in Louisiana