Pre-Dive Regulator Safety Checklist: 12 Critical Inspection Points Before Every Dive
Failed to add items
Add to basket failed.
Add to wishlist failed.
Remove from wishlist failed.
Adding to library failed
Follow podcast failed
Unfollow podcast failed
Pre-Dive Regulator Safety Checklist: 12 Critical Inspection Points Before Every Dive
-
Narrated by:
-
By:
Pre-Dive Regulator Safety Checklist: 12 Critical Inspection Points Before Every Dive I learned the hard way about regulator safety checks in Cozumel back in 2018. Skipped my usual pre-dive inspection because I was running late for a drift dive, got to 70 feet, and my second stage started breathing wet. Not a full freeflow, just enough moisture with each breath to make me question every decision I'd made that morning. Turned out a tiny grain of sand had lodged in the exhaust valve. Five seconds of inspection topside would have caught it. A thorough regulator safety check before every dive isn't paranoia—it's basic risk management. This checklist covers the twelve inspection points I run through on every single dive, whether it's my first of the trip or my fourth of the day. These aren't manufacturer-mandated service intervals or annual overhauls—this is the stuff you check *yourself*, *every time*, before you put that regulator in your mouth at depth. This applies whether you're diving a brand-new or a rental reg you've never seen before. The principles don't change. Visual Inspection Points 1. Hose Condition and Routing Check every inch of every hose for cracks, abrasion, or…