Bölümler

  • Energy Decision # 61 - BTM Solar + Storage Explained: Resize, Add Storage, or Wait
    11 Nov 2026

    Behind-the-meter solar + storage under successor net metering / net billing tariffs is now a tariff decision more than an equipment decision, because many states credit exported solar well below the retail rate you pay for power.


    This is Energy Decision #61 in the complete C&I energy management series by Daniel Burke. It's part of his mission to create the world's largest, free, high-trust energy resource library for commercial and industrial consumers.


    In this episode, Daniel Burke covers:

    - Export credit vs. retail rate, and how net billing and avoided-cost export rates cut into commercial solar payback

    - Time-of-use netting, minimum bills, fixed solar fees and annual true-up rules

    - NEM measurement period, from monthly netting to instantaneous netting, and what it means for battery storage

    - How to size commercial solar for self-consumption

    - When solar plus storage pays under a successor tariff

    - Net metering vs. gross metering vs. parallel metering, and why the meter is a contract

    - The demand charge gap, covering ratchet clauses, non-coincident peak demand and standby charges

    - Grandfathering provisions measured against project payback

    - Vendor proposal red flags and the questions that surface them


    Who this is for: facilities managers, operations directors, plant managers and CFOs at warehouse and distribution centers, retail chains, food and beverage manufacturers, commercial real estate portfolios and municipal facilities who are weighing a solar project under an export credit that no longer matches the retail rate.


    If you're asking whether to resize your solar array for self-consumption, add battery storage, or wait until net metering rules settle, this episode is built for you.


    Read the full breakdown on behind-the-meter solar + storage under successor net metering / net billing tariffs at tac-nrg.com


    If you're an Indiana C&I operator actively evaluating this decision, get your free Energy Decision Blueprint at tac-nrg.com/blueprint.


    Visit tac-nrg.com to access the entire Energy Answers resource library and the Energy Decision Blueprint for qualified Indiana C&I operators.


    00:00 Successor Tariffs and Export Credits

    02:49 Sizing Solar for Self-Consumption

    06:07 Role of Battery Storage

    08:59 Metering Configurations

    11:50 Demand and Standby Charges

    15:05 Grandfathering Provisions

    17:51 Navigating Utility Tariffs

    20:50 Final Recommendations

    Daha fazlasını göster Daha Az Göster
    26 dk.
  • Energy Decision # 60 - AI-Enabled Battery Dispatch Optimization Explained: Protect Your Warranty
    23 Oct 2026

    AI-enabled battery dispatch optimization and third-party dispatch rights decide who controls your battery, what it earns, and how fast it wears out.

    This is Energy Decision #60 in the complete C&I energy management series by Daniel Burke. It's part of his mission to create the world's largest, free, high-trust energy resource library for commercial and industrial consumers.

    In this episode, Daniel Burke covers:

    - Why identical batteries earn different returns, and how dispatch software drives that gap

    - Revenue stacking across demand charge reduction, energy arbitrage, frequency regulation, capacity payments and demand response

    - Battery degradation, cycle count, depth of discharge and capacity fade

    - How multi-market stacking can shorten battery life and threaten your warranty

    - Advisory platforms versus platforms with full bidding and execution authority

    - Degradation indemnification clauses and revenue-share floors

    - Per-stream revenue reporting versus blended net settlement

    - Battery telemetry data ownership, model reuse and access after termination

    - How to read vendor uplift claims and check whether your market can pay

    Who this is for: Plant managers, facilities managers, operations directors and CFOs at industrial manufacturers, cold storage and food processing facilities, commercial real estate with on-site storage, and operations already enrolled in demand response, who are deciding whether to hand battery dispatch to an outside platform.

    If you're asking whether you should let a third party control your battery dispatch, and whether revenue stacking can void your battery warranty, this episode is built for you.

    Read the full breakdown on AI-Enabled Battery Dispatch Optimization and Third-Party Dispatch Rights at www.tac-nrg.com

    If you're an Indiana C&I operator actively evaluating this decision, get your free Energy Decision Blueprint at tac-nrg.com/blueprint.

    Visit tac-nrg.com to access the entire Energy Answers resource library and the Energy Decision Blueprint for qualified Indiana C&I operators.


    00:00 Why Identical Batteries Earn Different Returns

    00:28 What Dispatch Rights Change

    01:26 In-House, Advisory, or Full Control

    02:53 Inputs Behind Each Dispatch Decision

    04:47 What AI Dispatch Platforms Do

    06:10 Revenue Stacking Explained

    08:32 Revenue Share vs. Flat Fee

    09:01 Degradation, Cycling and Capacity Fade

    10:57 Contract Protections for Your Warranty

    12:49 Advisory vs. Execution Authority

    14:43 Battery Telemetry and Data Protections

    16:11 The Right Order to Evaluate

    18:05 Red Flags and Questions for Vendors

    20:25 The Central Tradeoff: Battery Life vs. Revenue

    21:48 Energy Decision Blueprint

    Daha fazlasını göster Daha Az Göster
    24 dk.
  • Energy Decision # 59 - Interval Data Monetization Explained: What to Grant
    22 Oct 2026

    Interval data monetization and third-party analytics access rights decide who can see your facility's 15-minute meter data, what they may do with it, and what you get in return for it.

    This is Energy Decision #59 in the complete C&I energy management series by Daniel Burke. It's part of his mission to create the world's largest, free, high-trust energy resource library for commercial and industrial consumers.

    In this episode, Daniel Burke covers:

    - What interval meter data is, and why more than 35,000 readings a year reveal far more than 12 monthly bills

    - What a whole building load profile can reveal about production schedules and capacity

    - Who owns my facility's interval meter data, and how customer energy data consent works

    - Aggregated energy data versus site-specific data

    - Green Button Connect My Data versus utility NDA data sharing

    - Read-only analytics versus VPP aggregator data access that carries control commands

    - The data deletion clause and the five-year data retention precedent from a Minnesota PUC data access order

    - Value-sharing, and what ComEd's Rider Interval Meter Usage Data shows about smart meter data monetization

    - Writing one data access agreement for facilities in states with different rules

    Who this is for: Facilities managers, operations directors, plant managers and CFOs at manufacturing plants, cold storage and food processing facilities, healthcare systems, data centers, multi-site retail chains and university campuses who are being asked to hand over interval meter data, sometimes as a condition of service.

    If you're trying to decide whether to grant third-party data access to your interval meter data, and under what contract terms that protect your competitive information while capturing some of its value, this episode is built for you.

    Read the full breakdown on Interval Data Monetization and Third-Party Analytics Access Rights for C&I Meter Data at www.tac-nrg.com

    If you're an Indiana C&I operator actively evaluating this decision, get your free Energy Decision Blueprint at tac-nrg.com/blueprint.

    Visit tac-nrg.com to access the entire Energy Answers resource library and the Energy Decision Blueprint for qualified Indiana C&I operators.


    00:00 Don't Sign an Analytics Agreement Yet

    00:30 Interval Data and Third-Party Access

    01:22 Refuse, Narrow, or Trade for Value

    02:18 What Your Load Profile Reveals

    04:15 Who Owns Interval Data

    06:40 Three Pathways for Third-Party Access

    08:06 Structural vs. Contractual Protection

    09:03 Live Meter Data and Demand Response

    10:30 Separate Dispatch and Curtailment Rights

    10:58 Retention Limits and Deletion Clauses

    11:52 Why Interval Data Has Market Value

    13:41 The Right Order to Negotiate Access

    14:40 When Sharing Helps or Is Required

    16:05 Red Flags and Questions to Ask

    19:45 Energy Decision Blueprint

    Daha fazlasını göster Daha Az Göster
    22 dk.
  • Energy Decision # 58 - Advanced Metering Infrastructure (AMI) Explained: Use the Data You Already
    21 Oct 2026

    Advanced Metering Infrastructure (AMI) and Submetering determine how much of your facility's power use you can see, which parts of the building you can see it for, and who else can see it.

    This is Energy Decision #58 in the complete C&I energy management series by Daniel Burke. It's part of his mission to create the world's largest, free, high-trust energy resource library for commercial and industrial consumers.

    In this episode, Daniel Burke covers:

    - The FERC definition of AMI, which covers hourly or more frequent recording and daily transmittal

    - AMR vs AMI, and why one-way meter reading assumptions leave interval data unused

    - How to get 15-minute interval data and daily peak demand from your utility portal

    - How interval data supports demand charge management, load shifting and time-of-use rates

    - Why utility AMI measures only at the main meter, and when submetering is needed for tenant cost allocation

    - Submeter billing accuracy, tenant billing disputes and revenue leakage

    - Utility data access and load shape confidentiality

    - The AMI 2.0 meter replacement cycle and how to time your submetering investment

    - Technology-neutral procurement and cost/benefit analysis before vendor selection

    Who this is for: Facilities managers, plant managers, operations directors and CFOs at industrial facilities, manufacturing plants, commercial real estate, multi-tenant buildings, K-12 districts and municipalities who pay for power they cannot see inside their own buildings.

    You may be asking whether your utility smart meter replaces submetering, or how to get 15 minute interval data from your utility, or how to put AMI and submetering to work to cut costs. If so, this episode is built for you.

    Read the full breakdown on Advanced Metering Infrastructure (AMI) and Submetering at www.tac-nrg.com

    If you're an Indiana C&I operator actively evaluating this decision, get your free Energy Decision Blueprint at tac-nrg.com/blueprint.

    Visit tac-nrg.com to access the entire Energy Answers resource library and the Energy Decision Blueprint for qualified Indiana C&I operators.


    00:00 Your Utility May Already Have Your Data

    00:59 AMI vs. Submetering

    01:58 Energy vs. Demand Charges

    02:55 One Bad 15-Minute Interval

    03:24 How AMI Works vs. AMR

    05:18 Demand Management, Load Shifting and TOU

    06:15 What Submeters Reveal

    07:41 Can the Main Meter Answer Your Question?

    09:32 Submetering Payback and Tenant Billing

    10:30 Data Access and Privacy

    11:56 The Right Order Before Spending Capital

    12:54 Don't Let Vendors Define the Scope

    14:45 What to Pull From Your Utility Portal

    16:12 Final Checklist for Your Team

    17:11 Energy Decision Blueprint and Review Process

    Daha fazlasını göster Daha Az Göster
    20 dk.
  • Energy Decision # 57 - Rooftop Solar Structural Explained: Re-Roof or Walk Away
    20 Oct 2026

    The rooftop solar structural and roof-warranty decision for aging industrial and school roofs often decides whether a solar project pays off, long before the payback math gets a vote.

    This is Energy Decision #57 in the complete C&I energy management series by Daniel Burke. It's part of his mission to create the world's largest, free, high-trust energy resource library for commercial and industrial consumers.

    In this episode, Daniel Burke covers:

    - The lifespan mismatch between 25-30 year solar panels and 15-20 year commercial roof membranes

    - Remaining useful life versus roof age, and the 10-15 year re-roof threshold

    - Solar panel removal and reinstallation cost, and the math on re-roofing first

    - Roof load capacity for solar in pounds per square foot, and the stamped structural engineer letter

    - Ballasted versus mechanically attached solar racking, drainage, and ponding water

    - How a roof warranty gets voided, including third-party alteration clauses and overburden protection forms

    - The solar PPA roof replacement clause, including lost production payments, removal cost caps, and timeline penalties

    - Solar carport and ground-mount alternatives when the roof can't carry panels

    - Specifying an 80-mil membrane when re-roofing for solar

    Who this is for: facilities managers, operations directors, and CFOs at K-12 school districts, municipal facilities, warehouses, and small-to-mid manufacturers with aging flat or low-slope roofs who are weighing a rooftop solar proposal.

    If you're asking whether you should replace your roof before installing solar, or whether rooftop solar will void your commercial roof warranty, this episode is built for you.

    Read the full breakdown on the Rooftop Solar Structural and Roof-Warranty Decision for Aging Industrial and School Roofs at tac-nrg.com

    If you're an Indiana C&I operator actively evaluating this decision, get your free Energy Decision Blueprint at tac-nrg.com/blueprint.

    Visit tac-nrg.com to access the entire Energy Answers resource library and the Energy Decision Blueprint for qualified Indiana C&I operators.


    00:00 Why Solar and Aging Roofs Create a Mismatch

    01:24 Three Questions That Decide Fit

    01:54 Panel Life vs. Roof Membrane Life

    04:46 Hidden Removal and Reinstallation Costs

    06:40 Spare Structural Capacity

    08:33 Why a Stamped Structural Letter Matters

    10:24 Ballasted vs. Mechanically Attached Systems

    12:48 When Carports or Ground Mounts Make More Sense

    13:13 Solar and Roof Warranty Disputes

    16:55 The Roof Replacement Clause in a PPA

    18:50 The Correct Evaluation Order

    20:13 Red Flags in Weak Solar Proposals

    21:39 Notify Your Insurance Carrier Before Signing

    23:08 Bottom Line: Roof Health Before Solar Math

    25:00 Energy Decision Blueprint and Facility Support

    Daha fazlasını göster Daha Az Göster
    27 dk.
  • Energy Decision # 56 - Industrial Power Quality Solutions Explained: Diagnose First
    19 Oct 2026

    Industrial power quality solutions protect electronic equipment from voltage sags, transients, harmonic distortion, voltage imbalance and interruptions. Buying them in the wrong order can waste capital on protection that never addresses the actual problem.

    This is Energy Decision #56 in the complete C&I energy management series by Daniel Burke. It's part of his mission to create the world's largest, free, high-trust energy resource library for commercial and industrial consumers.

    In this episode, Daniel Burke covers:

    - Warning signs of poor power quality, such as unexplained tripped breakers, PLC resets and equipment running hot

    - Why most power quality disturbances originate behind the meter rather than on the utility grid

    - Voltage sags and swells, voltage transients, harmonic distortion, voltage imbalance and interruptions

    - How a power quality survey measures each disturbance, and why it must run for days or weeks under normal operation

    - IEEE 519-2022 harmonic distortion limits and ANSI C84.1-2020 voltage variation limits

    - Grounding-first sequencing before any mitigation equipment purchase

    - Surge protection device zones of protection, harmonic filters, voltage regulators and UPS systems

    - Vendor red flags and the questions that expose a weak power quality proposal

    Who this is for: Facilities managers, plant managers and operations directors at industrial manufacturing plants, healthcare facilities, water and wastewater treatment plants and commercial buildings who are dealing with unexplained equipment failures and downtime.

    If you're trying to decide whether to invest in power quality conditioning and harmonic filtering, or wondering how to tell if a power problem comes from the utility or from inside your building, this episode is built for you.

    Read the full breakdown on Industrial Power Quality Solutions at tac-nrg.com

    If you're an Indiana C&I operator actively evaluating this decision, get your free Energy Decision Blueprint at tac-nrg.com/blueprint.

    Visit tac-nrg.com to access the entire Energy Answers resource library and the Energy Decision Blueprint for qualified Indiana C&I operators.

    00:00 Introduction to Industrial Power Quality
    02:26 Understanding Power Quality and Voltage
    05:17 Conducting a Power Quality Survey
    07:32 Zones of Surge Protection
    10:21 IEEE 519 and Harmonic Limits
    12:36 Voltage Sags and Swells
    14:58 Solutions for Voltage Sags and Swells
    15:26 Voltage Imbalance and Its Impact
    15:55 Addressing Voltage Imbalance
    16:25 Interruptions and Backup Power
    16:52 Using UPS for Power Continuity
    17:17 Order of Fixing Power Quality Issues
    18:13 Steps to Diagnose and Fix Power Problems
    19:10 Targeted Protection for Specific Machines
    19:38 When Power Solutions Can Hurt
    20:06 Evaluating Power Quality Vendors
    20:35 Questions to Ask Vendors
    21:28 Action Steps for Power Quality Improvement
    21:54 Case Study: Utility and Building Fixes
    22:25 Final Recommendations and Resources

    Daha fazlasını göster Daha Az Göster
    26 dk.
  • Energy Decision # 55 - On-site Solar PV Explained: When It Pays
    9 Oct 2026

    On-site solar PV for C&I customers can lower operating costs and stabilize part of your power price. That only holds when your electricity rate, your state's export rules, your daytime load, and your ownership structure line up.
    This is Energy Decision #55 in the complete C&I energy management series by Daniel Burke. It's part of his mission to create the world's largest, free, high-trust energy resource library for commercial and industrial consumers.
    In this episode, Daniel Burke covers:
    - Behind-the-meter solar: self-consumption vs. exported energy, and how exports are credited depending on your state
    - Energy billed per kilowatt-hour vs. demand billed per kilowatt, and which one solar offsets
    - Solar plus storage for peak shaving, demand charge management, and backup power
    - Why your marginal energy charge sets your commercial solar payback period, and why your average bill rate overstates it
    - The split incentive problem between building owners and tenants
    - Export rule changes: California's net billing tariff and Indiana's phase-out of net metering
    - Direct ownership vs. third-party ownership: cash, loans, solar leases, and the solar PPA
    - The federal tax credit and its current deadlines, depreciation, SRECs, and elective pay for schools and municipalities
    Who this is for: plant managers, facility managers, and finance leaders at manufacturing plants, school districts, municipalities, breweries, farms, and retail operations who have a solar proposal in front of them and need to know whether the payback holds up.
    If you're asking whether solar makes sense for your manufacturing plant, or how a solar PPA compares with a cash purchase, this episode is built for you.
    Read the full breakdown on On-site Solar PV for C&I Customers at www.tac-nrg.com
    If you're an Indiana C&I operator actively evaluating this decision, get your free Energy Decision Blueprint at tac-nrg.com/blueprint.
    Visit tac-nrg.com to access the entire Energy Answers resource library and the Energy Decision Blueprint for qualified Indiana C&I operators.

    Daha fazlasını göster Daha Az Göster
    10 dk.
  • Energy Decision # 54 - ISO 50001 Explained: Savings That Last
    8 Oct 2026

    ISO 50001 and Strategic Energy Management (Expedited) give industrial and commercial facilities a structured energy management system for cutting energy costs year after year.

    This is Energy Decision #54 in the complete C&I energy management series by Daniel Burke. It's part of his mission to create the world's largest, free, high-trust energy resource library for commercial and industrial consumers.

    In this episode, Daniel Burke covers:

    - ISO 50001 energy management system (EnMS) requirements and the Plan-Do-Check-Act cycle

    - Energy review, energy baseline, and production-normalized energy performance indicators (EnPIs)

    - EU 2026-2027 thresholds and Germany's EnMS requirement

    - How much ISO 50001 saves, per ISO and DOE Superior Energy Performance data

    - Non-production period consumption on weekends and shutdowns

    - Sub-metering and the ISO 50001 payback period on monitoring infrastructure

    - Organizational failure modes and ISO 9001/14001 High-Level Structure integration

    Who this is for: plant managers, facility managers, and operations and finance executives at manufacturing plants, industrial facilities, commercial buildings, and municipalities who need energy cost reductions that last.

    If you're asking "do I need ISO 50001 for my facility" or how to build an energy management system for sustained savings, this episode is built for you.

    Read the full breakdown on ISO 50001 and Strategic Energy Management (Expedited) at tac-nrg.com

    If you're an Indiana C&I operator actively evaluating this decision, get your free Energy Decision Blueprint at tac-nrg.com/blueprint.

    Visit tac-nrg.com to access the entire Energy Answers resource library and the Energy Decision Blueprint for qualified Indiana C&I operators.

    Daha fazlasını göster Daha Az Göster
    10 dk.